Follow these simple steps or view the full how to guide here:

Battery - In order to get to the seat, remove the battery using the supplied key.

Unbolt & Remove – Undo the 5 bolts under your seat with a spanner. Lift off the seat.

Stretch & Secure – Slide the cover on, clip in the buckles, adjust and pull the bungie cord tight for a perfect fit.

Reattach & Ride – Bolt the seat back on, tighten it up, re-insert the battery as normal and hit the road in style!

The DiroDi Pro uses a lift-and-latch seat mechanism. Because our seat covers add a few extra millimetres of thickness, the seat may not fully close or latch properly once installed.

Locate the 2 rear bolts underneath the seat (near the latch area).
Remove the nuts, along with the locking bracket and original washer.

Reinstall components in this order:
Place original washer onto each bolt
Place 2 x M10 new washers onto each bolt (these act as spacers).
Locking bracket
Nut
Tighten both nuts securely

This adjustment creates the extra clearance needed for the latch to engage properly, ensuring the seat closes and locks as intended.

Currently we stock seat covers for:

• DiroDi Rover (Gen 1 - 6)
• DiroDi Rover PRO (Requires 4 M10 washers - Included)
• Fatboy - Harlem v2 & Scrambler v2 (NOT Compatible with v3)
• Ampd Bros - ACE range
• Truenorth - Seeker & Finder
• Stator - Scout & CUB
• Toland - Huntsman
• Rever - Summit & Canyon
• Cruzr - Stoke, Swell, Coast Gen 2 & Trigger Gen 2 (NOT Compatible with Gen 3)
• Flight Risk - 303, 333, 505, 555 & 777
• Big Kahunaz - Burleigh & Alley Cruizer
• Sun Chaser - Alpha & Nova

It’s completely normal for your seat cover to have some wrinkles when first installed. Our covers are designed to stretch and form to your seat over time.

Once the cover has been properly stretched and installed according to the instructions, the wrinkles will naturally settle out with normal use. Exposure to direct sunlight helps the material relax and conform to the shape of your seat.

After a short period of riding and sun exposure, the wrinkles will smooth out on their own.

⚠️ Important:

Do not iron the seat cover or apply direct heat, as this can damage the material.

If you’ve installed the cover correctly, just ride and let time and sunlight do the rest.

Our seat covers are made from premium 2mm neoprene SBR with a polyester-laminated finish - built for durability, water-proof, and all-day comfort. Plus, they keep your bum from burning in the harsh Aussie sun!

Absolutely! Our Seat Drip Co. covers are waterproof, so your seat stays completely dry no matter the weather. The inner layer is 2mm neoprene SBR, giving you extra cushioning, comfort, and protection while keeping your ride fresh and ready for anything.

Wipe with a damp cloth and mild soap if required. Do not machine wash or tumble dry.

Yes! We accept Afterpay, allowing you to buy now and pay later in 4 interest-free installments. Simply select Afterpay at checkout.