Seat Drip Co. seat cover

Battery key to remove the battery

10mm Spanner to remove the seat

Your e-bike seat

A soft cloth (optional, for cleaning)

Use the provided key to remove the battery, then undo the 5 bolts under your seat with a 10mm spanner. Lift off the seat.

Before installing the cover, give your seat a quick clean to remove any dirt or dust. Use a soft cloth to wipe down the surface, ensuring a smooth and clean base for the cover. This step is optional but recommended for the best fit and longevity.

Take your Seat Drip Co. cover and stretch it gently over the seat. Start by aligning the back edge of the cover with the back of your seat, then slowly work your way toward the front. Make sure the cover is evenly positioned on both sides of the seat.

Your cover will have a tightening cord which should always be installed at the back of the seat with straps and clips to secure it in place.

Clips: Fasten them tightly to the underside of the seat and clip together to keep the cover snug.

Tightening cord: Pull the cord tight for a secure fit.

Once the cover is secured, adjust the fabric so it sits neatly and comfortably around the seat. You should have a smooth, even surface with no wrinkles or sagging areas.

Before heading out for your ride, sit on the seat to ensure the cover feels comfortable and secure. Check to make sure it’s not sliding or shifting. If it needs adjusting, now’s the time!

Simply reattach it to the bike frame and tighten the 5 bolts with the 10mm spanner. Re-insert the battery.